Pladespillere

Fletcher

Tom Fletcher´s pladespillere får så meget op af rillerne at man overraskes. Samtidig med en dynamik, og musikalitet man sjældent høer. Ring for pris. Klik på billedet hvor du har link til FletcherAudiios hjemmeside.

Pladespillere:

Omega Point 1 kr. 15.000,-

Omega Point 3 kr. 25.000,-

Omega Point 5 kr. 35.000,-

Arme:

Zero arm kr. 9.000,-

Dual Tracer kr. 18.000,-

Pioneer : PL-30

PL-30 pladespilleren er en klassisk fuldautomatisk konstruktion.

Dog har Pioneer et par esser i ærmet såsom indbygget Riaa så du kan tilsluttet den til hvilket som helst HiFi anlæg.

Understellet på pladespilleren er en sandswichkonstruktion, som er bygget oven på en 4 mm tyk bundplade i metal. Dette for at minimere vibrationer. Pladespilleren leveres med en MM-pickup fra Audio Technica.

Pris: 2995,-

Bestillingsvare.

Pro-Ject : Elemental

Helt ny begynderpladespiller fra Pro-Ject. Prisen er ikke meget højere end de billige plastik pladespillere. Her får du en rigtog god pladespiller til aldeles fornuftige penge.

Prisen er incl. en Ortofon pick up kun kr. 1595,-

Leveres i sort/sølv, sort/rød eller sort/hvid.

Ikke lagervare.

Pro-Ject : Essential II

Konstruktion: Belt drive
Hastigheder: 33/45 rpm
   
Finish: Black, white
Mål (B x D x H): 41,5 x 36,5 x 11,2
Garanti: 24 mdr.
Rentefrit 12 måneder: 251,-
Førpris:

2.195,-   I hvid kun kr. 1995,-

 

Pro-Ject : Debut Carbon SB

Debut III SB
Konstruktion: Belt drive
Hastigheder: 33/45/78 rpm electronic
Pick-up: Ortofon, 2M Red
Finish: Black, silver
Mål (B x D x H): 41,5 x 32,5 x 13,3
Garanti: 24 mdr.
Rentefrit 12 måneder: 283,-
Pris: 4.195,-
Ortofon 78 nål kr: 595,-

Pro-Ject : Debut Carbon

 

Konstruktion: Belt drive
Hastigheder: 33/45 rpm
Pick-up: ORTOFON OMB 10
Finish: colours high gloss
Mål (B x D x H): 41,5 x 32,5 x 13,3
Garanti: 24 mdr.
Rentefrit 12 måneder: 300,-
Pris: 2.995,- Husk prismatch!! 

m/2M red pick kr. 3395,-

EISA prisvinder (årets pladespiller) 2012-13

Pro-Ject : 1 Xpression III Carbon

1 Xpression

• Belt drive system with synchronous motor

• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom

• Heavy steel sandwich platter with TPE technology for superior resonance damping & felt mat

• 8,6” carbon tonearm with Evo Kardan rings

• Resonance damping counterweight design

• Gold-plated RCA interconnect cable

• Special turntable feet for effective decoupling for massively reduced risk of acoustical feedback

Finish: Highgloss piano

Med Ortofon 2M Red Kr. 4.995,-

Pro-Ject : 2 Xperience Classic

2 Xperience
Konstruktion: Belt drive
Hastigheder: 33/45 rpm
Pick-up: Ingen
Finish: Black, Acryl, Olive
Mål (B x D x H): 41,5 x 32,5 x 13,3
Garanti: 24 mdr.
Rentefrit 12 måneder: -
Pris: 7.995,- Skaffevare!

Pro-Ject : 6 perspeX

Perspective
Konstruktion: Belt drive
Hastigheder: 33/45 rpm
Pick-up: Ingen
Finish: Clear acryl base
Mål (B x D x H): 46 x 36 x 18,2
Garanti: 24 mdr.
Rentefrit 12 måneder: 1000,-
Pris: 11.995,- Skaffevare

Pro-Ject : RPM-1

Klik på billedet for test i What Hi-Fi
Konstruktion: Belt drive
Hastigheder: 33/45 rpm
Pick-up: Ortofon OMB3e
Finish: Black
Mål (B x D x H): -
Garanti: 24 mdr.
Rentefrit 12 måneder: 260,-
Pris: 3095,-
Nu gså i rød, hvid og sort high gloss med Ortofon 2M red pick up kr. 3495,-

Pro-Ject : RPM-9.1

RPM-9
Konstruktion: Belt drive
Hastigheder: 33/45 rpm
Pick-up: Ingen
Finish: Black
Mål (B x D x H): 44 x 32,5 x 18
Garanti: 24 mdr.
Rentefrit 12 måneder: 1116,00
Pris: 12.395,-

Pro-Ject : Vertikal

 Vertical standing or wall mount option included  

• Choose “R” (right-handed) or “L” (left-handed) version  

• Instant playback with super-easy setup  

• Record clamp for secure record fixing  

• Belt drive with silicone belt  

• Low vibration synchronous motor & DC power supply  

• 8,6” aluminium tonearm  

• Ortofon OM5e cartridge, pre-mounted  

• Pre-adjusted tracking force & anti-skating force  

• Special mechanism for perfect tracking in vertical position  

• Pre-mounted gold-plated RCA interconnect cable  

• Colour options: Black matt, White matt, Red matt  

Pris kr. 2495,-

Pro-Ject : Vertikal BlueTooth

 Vertical standing or wall mount option included  

• Choose “R” (right-handed) or “L” (left-handed) version  

• Instant playback with super-easy setup  

• Bluetooth output for wireless use  

• Record clamp for secure record fixing  

• Belt drive with silicone belt  

• Low vibration synchronous motor & DC power supply  

• 8,6” aluminium tonearm  

• Ortofon OM5e cartridge, pre-mounted  

• Pre-adjusted tracking force & anti-skating force  

• Special mechanism for perfect tracking in vertical position  

• High quality RCA interconnect included  

• Colour options: High-gloss Black, White or Red  

Pris kr. 3895,-

Rega : Planar 1

Tonearm
Brand new RB110 tonearm built with the new Rega designed, bespoke, zero play bearings with ultra-low friction performance (Patent Pending). New bias assembly and integrated arm clip. Includes automatic bias adjustment negating the need for the user to set bias, making this the most ‘Plug & Play’ turntable we have ever manufactured. New ergonomically, re-designed and stiffer headshell for improved usability and appearance.

Cartridge
Rega Carbon cartridge supplied fitted as standard.

24v synchronous motor
The first entry level Rega turntable to use a 24v, synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.

Plinth
Brand new Thermoset, gloss laminated plinth with vastly improved appearance and new ergonomically positioned on/off switch located on the underside. Two stunning plinth finishes available, gloss black and gloss white.

Central Bearing housing
Re-designed brass main bearing, offering improved fit and removing stress on the bearing itself whilst minimising the transfer of potential energy. (Patent pending)

Platter
Brand new, 23mm, higher mass, phenolic platter with improved flywheel effect for improved speed stability.

Re-Designed feet
New improved feet to increase stability and reduce vibration transfer.

Motor cover tray
New motor cover tray with integrated cooling.

Balance Weight
New 111g ‘Plug and Play’ balance weight.

Pris kr. 2495,-

Rega : Planar 2

Tonearm - Featuring the brand new RB220 tonearm which is packed with groundbreaking new features. Incorporating new ultra low friction, Rega designed, bespoke, zero play ball bearings (Patent Pending), housed within a brand new, stiffer and lightweight bearing housing which was developed with a new automatic bias setting negating the need for the user to set bias, making it almost completely plug and play apart from simple arm balancing. The new housing also includes an integrated arm clip and uses Rega's latest custom aluminium arm tube.

Hub bearing - The Planar 2 has a new 11mm self securing brass bearing (Patent Pending) offering improved fit and less stress on the bearing preventing the transfer of potential energy.

Plinth - High gloss acrylic laminated plinth, stiffer and vastly improved appearance with ergonomically positioned power switch. Two plinth finishes at launch: gloss black & gloss white

Motor - New 24v low noise, low vibration motor assembly and new PCB.

Platter - New float glass ‘Optiwhite’ 10mm – Improved accuracy platter.

Other features :

  • Re-designed feet - New improved foot assembly to increase stability and reduce vibration transfer.
  • Carbon cartridge - supplied as standard on all Planar 2’s for simple plug and play convenience.
  • Motor cover tray - with integrated cooling.
  • Optional lid / plinth protectors - supplied to prevent marks on the plinth and keep it looking its best.
  • Instructions - Easy to use multi-lingual quick start guide for easy set up.
  • Packaging - New improved packaging.
  •  
  • Pris kr. 3495,-

Rega : Planar 3

 

RB330 tonearm - Designed using the latest 3D CAD & CAM technology, the new RB330 is the culmination of more than 35 years of tonearm design experience.  Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before.

  •  Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated
     arm clip and an improved spring housing with easier to read numbers.
  •  Rega made, new low capacitance phono cable with Neutrik plugs,
  •  Improved lower friction, precision horizontal and vertical bearings
  •  New design 100g mild steel balance weight.
     

Plinth - High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch.Two plinth finishes at launch: gloss black & gloss white

Double braces - Improved thicker 3mm phenolic bottom brace and new metalised skin phenolic top brace.

Bearing housing – Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself.

Sub platter - Re-designed sub platter, improved accuracy and improved stiffness.

Platter - New float glass ‘Optiwhite’ polished rim 12mm – Improved accuracy in manufacture and stunning looks.

Re-designed foot - New improved foot to increase stability and reduce vibration transfer.

24V motor - Improved new motor control PCB with integration for the addition of TT-PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately).

Motor cover tray with integrated cooling.

Pris incl. Elys2 kr. 5895,-

Rega Planar 6

The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim.

The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard.

The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable.

Key Features:

  • NEO power supply.
  • Super lightweight foam core plinth.
  • Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin.
  • Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim.
  • Upgrade white drive belt fitted as standard.
  • Custom dual layer smoked / clear float glass platter.
  • Single piece aluminium sub platter.
  • Custom machined high precision drive pulley.
  • Patent pending, ultra-low friction central brass hub.
  • Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy.
  • RB330 handmade precision tonearm with custom stainless weight.
  • New high spec Rega 24v low noise synchronous motor – each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control.
  • New smoked dust cover.
  • New aluminium foot trims and Planar style feet.
  • Available with Ania MC cartridge factory fitted / Discount available when factory fitted.

Pris u/pick up kr. 9995,-

Pris incl. m/Exact pick up kr. 11.995,-

Pris incl. Ania MC pick up kr. 13.995,-

Pris incl. Ania MC pick up + MC FONO Riaa kr. 15.995,-

 

Rega : RP-8

Ikke kun designet vækker opsigt her, materialevalg og ydelse er noget helt for sig selv. RP8 fra Rega, er et teknologisk kvantespring i materialevalg og koblingsløsninger der på ydelse udfordre alle modeller på markedet, uanset pris.

Rega RP8 pladespilleren kort:

12” glastallerken i tre lag glas i periferien for bedre moment
24V fastmonteret håndjusteret lavvibrationsmotor der styres af den individuelt justerede separate TT-PSU motorstyring
Super letvægts plint i sandwich konstruktion med polyfin olieskumkerne
Magnesium og phenolskinner mellem centerleje og armbase for yderligere stivhed
Rega RB-808 arm med armrør støbt i ét stykke der både er konisk indvendigt og udvendigt for optimal ressonansstyring
Armrør monteret med præcisionslejer, der giver perfekte arbejdsbetingelser for pickuppen

Pris Kr. 15995,- uden pick-up 

 (Apheta2 pick-up +Kr. 7.500,-)

Demo.tilbud incl. Alpheta pick up kun kr. 18995,-

Rega : RP-10

Rega RP10 pladespilleren er en teknisk bedrift i moderne produktionsmetoder og materialevalg

Stort set alle andre grammofoner på markedet vil i sammenligning med REGA RP10 fremstå gammeldags og bagudstræbende i deres tekniske løsninger og evne til at gengive LP pladen korrekt.

Pris Kr. 29.995 u. pick-up

(Apheta2 pick-up +Kr. 6.995,-)

Demo.tilbud incl. Alpheta pick up kun kr. 29995,-

Scansonic : Pladespiller m. USB

USB pladespiller med indbygget Riaa forforstærker. Plug`N`Play løsning og du lytter til dine vinyller igen.

Pris KR. 1295,-

Teac : TN-300

USB pladespiller med indb. Riaa. Leveres i sort, kirsebær eller hel lys træsort. Incl. AudioTechnica pick up.

Pris kr. 2995,-

Technics: Pladespiller SL-1210GR

 

Grand Class SL-1200GR ser dagens lys. Og det er godt nyt for alle ægte musiknørder.

Grand Class SL-1200GR-pladespilleren positioneres som lillebror til den populære SL-1200G.

Og Panasonic tør godt love, at det nye familiemedlem er blevet forfinet. Teknologien er nyudviklet og blevet skarpere med en forbedret rotationskontrol, motor, tonearm og pladetallerken.

Markedets nyeste teknologi sikrer, at musikken hverken hakker eller skratter som i gamle dage, men spiller stabilt og sikkert.

 
Turntable Specifikation:
 
Type: Direct Drive Manual Turntable
Turntable Speeds: 33 1/3, 45, 78 r/min
Adjust Range: ±8%, ±16%
Starting Torque: 2.2 kg・cm
Build-up Characteristics: 0.7 s. from standstill to 33 1/3 r/min
Wow and Flutter: 0.025% W.R.M.S.
Rumble: 78dB (IEC 98A Weighted)
Turntable Platter: Aluminum die-cast
Diameter:332mm
Weight:Approx. 2.5kg (Including rubber sheet)

Tonearm Specifikationer:
 
Type: Universal, Static Balance
Effective Length: 230mm
Overhang: 15mm
Tracking Error Angle:
Within 2° 32' (at the outer groove of 30cm record)
Within 0° 32' (at the inner groove of 30cm record)
Offset Angle: 22°
Arm Height Adjustment Range: 0 - 6mm
Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
Head Shell Weight: Approx. 7.6g
Applicable Cartridge Weight Range:
[without auxiliary weight] 5.6 - 12.0g (14.3 - 20.7g (including head shell))
[with auxiliary weight] 10.0 - 16.4g (18.7 - 25.1g (including head shell))
Cartridge Mounting Dimension: JIS 12.7mm, interval
Head Shell Terminal Lug: 1.2mmφ 4-pin terminal lug
 
Terminals:
 
Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1

General:
 
Dimensions (W x H x D): 453 x 173 x 372 mm
Weight: Approx. 11.2kg
 
Pris.: 12.495,-