RIAA(Forstærker til pladespiller)

Primare : R32 Phono Riaa

Specifications


Input sensitivity = 1.7mV for 200mV output
Input loading = 47KΩ in parallel with 100pF
Maximum input level = 60mV at 1KHz
Gain = 41.4dB at 1KHz
Output impedance = 200Ω
Recommended minimum output load resistance = 5KΩ
Frequency response (50KΩ output load) = 15Hz (-3dB) to 100KHz (-0.2dB)
RIAA accuracy (50KΩ output load) = better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 80mA maximum.
Only to be used with Rega PS1

Pris DKK. 7495,-

Pro-Ject : Phono Box MM

Genial RIAA til en fantastisk pris. Forbind din gamle pladespiller til anlægget ígen via Phono Box MM.

Pris: 695,-

Pro-Ject : Phono Box S

Riaa for MM

Pris:   995,-          

Phono Box

Pro-Ject : Tube Box mk S

Rør riaa for MM/MC  leveres i sølv eller sort.

Pris kr: 2995,-

Rega : Aria MM / MC

  • Maximum output level = 11v RMS
  • Rated output level = 200mV
  • Output resistance = 100Ù
  • Minimum output resistance for a –3dB point at 15Hz = 1K
  • AC supply 230v & 115v Nominal +/- 10%
  • 230v 20mm Fuse T250mAL
  • 115v 20mm Fuse T500mAL
  • Power Consumption = 10 Watts
  • Ambient operating temperature 5 to 35°C
  • Dimensions: W 220mm x D 320mm x H 80mm

 

Aria MC dip switch settings for all Rega MC cartridge models

 

DKK 7795,00

Rega Fono MC

The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

Specifications

Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.

Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV

Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω

Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB

Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV

Load settings for adjustable MC stages

Impedance -100ohm
Capacitance - 1000pF
Gain setting - High ('On' position for Rega phono stages)

Fono MC dip switches settings (factory set at Rega for Rega MC models

Pris kr. 2495,-

Rega : Fono MM

Specifications


Input sensitivity = 1.7mV for 200mV output
Input loading = 47KΩ in parallel with 100pF
Maximum input level = 60mV at 1KHz
Gain = 41.4dB at 1KHz
Output impedance = 200Ω
Recommended minimum output load resistance = 5KΩ
Frequency response (50KΩ output load) = 15Hz (-3dB) to 100KHz (-0.2dB)
RIAA accuracy (50KΩ output load) = better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 80mA maximum.
Only to be used with Rega PS1

Pris:  1995,-

Fono MM

Rega A2D m/USB

  • Input sensitivity: 5mV for 500mV output
  • Input loading: 47k +100pF
  • Maximum input level: 70mV @ 1kHz
  • Output Impedance: 100 Ohms
  • Signal to noise ratio: 78dBA ref 5mV
  • Power requirements: 24VAC 85mA
  • Input for full scale digital output: 7.5mV
  • Dimensions  W 102mm x D 125mm x H 30mm
  • Pris kr. 795,-