ProAc

ProAc Tablette 10

Klik på billed. ProAc's hjemmeside.

 

Mød den nye spændende Tablette 10.

 

Nominal Impedance. 8 ohms

Recommended Amplifiers. 10 to 120 Watts


Frequency Response. 50hz to 30Khz


Sensitivity. 86.5 dB linear for 1 watt at 1 metre


Bass/Midrange. 5 7/8" (150mm) Polymer Impregnated Kevlar cone with black acrylic phase plug


Tweeter. 3/4" (20mm) ProAc silk dome with damped front plate. Mirror image offset configuration.

 

Crossover. Finest components on dedicated circuit board. Multistrand oxygen-free cabling throughout, split for optional bi-wiring/ bi-amping


Dimensions.Height: 10 5/8" (270mm), Width: 6" (150mm), Depth: 9 3/4" (235mm) including grille


Weight. 5 Kgs each


Mode. Stand/Shelf mounting


Grille. Acoustically transparent crimplene


Finish.
Standard Finishes: Black Ash, Mahogany, Cherry, Maple.

Premium Finishes: Rosewood, Ebony.

*Premium Finishes to order at extra cost*

 

 

Pris.: 4.995,- Stk

 

 

ProAc Response DB3

Klik på billed. ProAc's hjemmeside.

 

Pris.: 7.495,- Stk.

 

 

ProAc Responce DB1

Klik på billed. ProAc's hjemmeside.

 

Lille Højttaler med stor scene tilstedeværelse. Mød den nye ProAc DB1

 

Nominal Impedance. 4 ohms

Recommended Amplifiers. 10 to 250 Watts Frequency Response 25hz to 30Khz Sensitivity 90 dB linear for 1 watt at 1 metre

Bass Driver. 2 x 6 1/2" (165mm) studio professional drive units with polymer impregn impregnated Kevlar cones and Zinc basket.

Midrange Driver. 2" (50mm) soft dome with 6061 Aluminium Alloy Front Plate.

Tweeter. ProAc ribbon with diaphragm 'as light as a human hair' alnico magnet a and rear chamber damping and 6061 Aluminium Alloy Front Plate.

Crossover. Finest components on dedicated dual layer circuit board; ProAc multistrand oxygen-free copper cable throughout; Split for optional bi wiring and bi-amping.

Dimensions. 46" high (1185mm) with spikes and plinths, 8 1/2" (215mm) wide, 13 1/2" (340mm) deep Weight 97 lbs (44 Kgs) each Mode Floorstanding on spikes Grille Acoustically transparent crimplene

Finish. Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony.

*Premium Finishes to order at extra cost*

 

Pris.: 8.995,- Stk.

 

 

ProAc Response D2

Klik på billed. ProAc's hjemmeside.

 

Denne højttaler har en superb mellemtone og bygge kvalitet. Hvilket gør denne højttaler til en sand monitor.

Pris.: 9.995,- Stk.

 

 

ProAc Response D48 (Dome eller Ribbon Tweeter)

Klik på billed. ProAc's hjemmeside.

 

Nominal Impedance. 4 ohms

Recommended Amplifiers. 10 to 250 Watts

Frequency Response. 20Hz to 30Khz

Sensitivity. 90 dB linear for 1 Watt at 1 metre

Bass/Midrange. 2 x 6 1/2 inch (165mm) ProAc unit studio monitor design with special coating and dust cap tuning.

Tweeter.: D48R - ProAc ribbon 60mm x 10mm 'light as a human hair' with rear chamber damping  OR Tweeter.: D48 - ProAc 1 inch (25 mm) soft dome with special surround and inner damping.

Crossover. HQC using dedicated components wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring/bi-amping

Dimensions. 47 1/4 inch (1200mm) high on plinths with spikes 8 1/3 inch (212mm) wide
13 1/2 inch (340mm) deep

Weight. 86 lbs (39 Kgs) each

Mode. Floor standing

Grille. Acoustically transparent crimplene

Finish. Standard Finishes: Black Ash, Mahogany, Cherry, Maple.Premium Finishes: Rosewood, Ebony.

*Premium Finishes to order at extra cost*

 

Standard Finish    Pris.: 29.095,- Stk.

Ebony/Rosewood Pris.: 30.495,- Stk.

 

 

ProAc K6

Klik på billed. ProAc's hjemmeside.

 

Betagende lyd og et smukt stilrent design. Det er hvad du vil opleve, hvis du ser og hører denne fantastiske højtaler.

Nominal Impedance. 4 ohms

Recommended Amplifiers. 10 to 250 Watts

Frequency Response. 25hz to 30Khz Sensitivity 90 dB linear for 1 watt at 1 metre

Bass Driver. 2 x 6 1/2" (165mm) studio professional drive units with polymer impregn impregnated Kevlar cones and Zinc basket. Midrange Driver 2" (50mm) soft dome with 6061 Aluminium Alloy Front Plate.

Tweeter. ProAc ribbon with diaphragm 'as light as a human hair' alnico magnet a and rear chamber damping and 6061 Aluminium Alloy Front Plate.

Crossover. Finest components on dedicated dual layer circuit board; ProAc multistrand oxygen-free copper cable throughout; Split for optional bi wiring and bi-amping.

Dimensions. 46" high (1185mm) with spikes and plinths, 8 1/2" (215mm) wide, 13 1/2" (340mm) deep Weight 97 lbs (44 Kgs) each Mode Floorstanding on spikes Grille Acoustically transparent crimplene

Finish. Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony.

*Premium Finishes to order at extra cost*

 

Standard finish.     Pris.: 62.095,- Stk.

Ebony/Rosewood. Pris.: 64.995,- Stk