God på Trustpilot

Tilmeld nyhedsbrev

Finansiering

Tlf. 35 42 04 41
MUSICAL FIDELITY M8XI
  • MUSICAL FIDELITY M8XI
  • MUSICAL FIDELITY M8XI

MUSICAL FIDELITY M8XI

44.995,00 DKK 53.995,00 DKK

Vejl. udsalgspris 53.995,00 DKK

Lagerstatus: På lager
stk.

M8xi er en separat forforstærker med to monoblok effektforstærkere, der deler et fælles chassis. Hver har sin egen køleplade og separat transformer. Ægte dual mono. Forforstærkeren har sin egen separate strømforsyning og er monteret tæt på indgangsstikkene. PCB-spor er derfor meget korte. Denne elegante idé sikrer, at begge kanalers signaler er ultra-lav impedans i det øjeblik, de kommer ind i forstærkeren. Dette er en væsentlig detalje. Hver kanal har tolv store bipolære transistorer - 200 ampere peak to peak er let tilgængelige. Metalarbejdet er af høj kvalitet. Frontpanelet er en specialfremstillet finlinjeekstrudering af milspec aluminium. De specialfremstillede køleplader har fremragende afledningsegenskaber og finish. M8xi-konstruktionen har en følelse af soliditet og kvalitet.

 

M8xi - Specifications

Amplifier

  • Power Output (20Hz - 20kHz): 550 Watts per channel into 8 Ohms (870W into 4 Ohms); Peak 1.6kW into 2 Ohms
  • Maximum output voltage: 67 Volts RMS, 20Hz to 20 kHz; onset of clipping (190 Volts peak-to-peak)
  • THD+N: <0.004% typical, 20Hz to 20 kHz (XLR)
  • Signal/noise ratio: > 86dB ‚A‘-weighted (XLR)
  • Input impedance: 25KΩ (RCA), 50KΩ (XLR)
  • Frequency response: +0, –1dB, 10Hz to 100 kHz
  • Maximum peak output current: 105 Amps
  • Damping factor: 150
  • Output devices: 3+3 pairs (bridged arrangement) per channel

Inputs (analogue)

  • 4 pairs line level RCA connectors
  • 2 pairs line level XLR (balanced) connectors

Inputs (digital)

  • 2x Coax S/PDIF up to 24 bit 192kHz
  • 2x Optical S/PDIF up to 24 bit 96kHz
  • 1x USB B Asynchronous USB up to 24 bit 192kHz

Outputs (analogue)

  • 1 pair line level RCA fixed
  • 1 pair pre-out RCA variable
  • 1 pair line level XLR variable

Outputs (digital)

  • 1x Coax S/PDIF up to 24 bit 192kHz
  • 1x Optical S/PDIF up to 24 bit 96kHz

General

  • Dimensions (WxHxD): 485 x 185 x 510mm
  • Max. Consumption: 2000Watts

M6si - Overview

At Musical Fidelity we think of the M6si as being a destination product. The M6si offers such excellent performance, facilities and power that unless you are seeking the most exotic high-end sound quality you would never need another amplifier. We believe it’s that good.

Internally, the M6si is configured as 2 independent monobloc power amps with a separate pre amp. It is, in fact, a pre amp with 2 monobloc power amps that just happen to share the same casework.

The M6si has 220wpc. It has very low distortion, outstanding noise ratio and extremely flat frequency response. Its inputs are phono (MM/MC), 4 line level, 1 balanced XLR and 1 USB ‘B’ up to 24bit 96kHz asynchronous.

The M6 combination of high power, high current and extraordinary stability means that it can drive any loudspeaker with ease.

In use it is hard to hear any practical difference between the M6si and other much more expensive amplifiers. In proper blind listening comparisons, the M6si performs incredibly well. If we sound rather enthusiastic it’s because we are.

We love the M6si and hope that you do too.

M6si In Brief

  • 220WPC
  • Excellent technical performance
  • Amazing load driving ability, unconditional stability will drive any loudspeaker
  • Wide range of useful inputs including asynchronous USB and switchable MM / MC Phono
  • Preamp output
  • Internally it is a separate preamp with two independent monobloc power amps; effectively a separates system in a box
  • Excellent, hunky build quality

M6si - Specifications

Amplifier

  • Power output: 220 Watts per channel into 8 Ohms
  • THD (+ noise): <0.007 % typical 20Hz - 20 kHz
  • Signal to Noise Ratio: >107dB ‘A’ - weighted
  • Frequency Response: +0, –0.1dB, 10Hz to 20 kHz

Inputs

  • 4x Line Level RCA
  • 1x Line Level XLR Balanced
  • 1x USB type ‘B’ connector - asynchronous data stream at up to 24-bit/96kHz
  • 1 x switchable phono input
  • Trigger in

Phono Input

  • Sensitivity: 3mV nominal (MM), 0.4mV nominal (MC)
  • Signal / noise ratio: >84dB ‘A’-weighted
  • Input impedance: 47k Ohms (MM and MC)
  • Frequency response: RIAA/IEC ±0.5dB 20Hz-20kHz

Outputs

  • Trigger out
  • Fixed, line level output
  • Variable, preamp output

General

  • Dimensions - WxHxD (mm): 440 x 125 x 400
  • Weight (unpacked / packed): 16.6 kg/ 21.3 kg

Relaterede produkter

VISA Electron Mastercard VISA MobilePay