Audio Analogue ABsolute Mono

Audio Analogue ABsolute Mono

525.200,00 DKK

Vejl. udsalgspris 525.200,00 DKK


Lagerstatus: 1-3 dage

Igen med Absolute seriens top-MONO effekttrin viser Audio Analogue at de høre hjemme i den Absolutte superliga.

Audio Analogue Absolute Monoblock er en højkvalitets, håndlavet forstærker designet i Italien. Den leverer 150 watt pr. kanal ved 8 ohm og 300 watt ved 4 ohm, hvilket sikrer kraftfuld og præcis lydgengivelse. Forstærkeren er udstyret med en solid aluminiumskonstruktion, hvilket reducerer vibrationer og forbedrer lydkvaliteten. Den bruger også førsteklasses komponenter og avanceret kredsløbsdesign for at minimere forvrængning og maksimere lydklarhed. Absolute Monoblock er kendt for sin fremragende byggekvalitet og lydpræstation, hvilket gør den ideel til audiofile og high-end lydsystemer.

 

 



As an evolution of the ABsolute integrated, ABsolute Monoblock is the flagship amplifier of Audio Analogue. With its 100W of pure class A, it is able to drive at maximum performanceany type of speaker while maintaining the typical refinement of the pure class A.

Power, control, infinite power reserve and all the tonal refinement of the pure class A. An absolute reference amplifier able to give the maximum for every listening parameter.

TECHNICAL DESCRIPTION

Inductive power supply consisting of toroidal transformer and a toroidal inductor for branch designed specifically for ABsolute Monoblock.

Overall feedback free circuit.

All stages are fully balanced.

The ABsolute Monoblock is polarized in Class A up to 100 W on 8 Ohms, so it dissipates about 370 W in heat. The bridge output stage features twelve pairs of transistors, each 200W.The amplification stage is a further improvement of the SeGeSTA structure, which has already been used in the Anniversary series.

The structure is deliberately asymmetric and works in current, without global feedback.

Oversized traditional mounting military resistors to minimize thermal distortion.

Capacitors for audio use.

One balanced monophonic input.

Managed by a microcontroller.

TECHNICAL SPECIFICATIONS

Number of channels

1

Input impedance

47 kΩ

Gain

20 V/V

26 dB

Power on 8Ω load

1% THD

100W cl. A pure/115W cl. AB

Power on 4Ω load

1% THD

50W cl. A pure/230W cl. AB

Power on 2Ω load

1% THD

25W cl. A pure/380W cl. AB

Sensitivity

100W class A pure, on 8Ω

1.4 VRMS

Noise voltage reported at the input

weighed A

4,0µV

Noise voltage at the output

20 Hz – 80kHz

220µV

Noise voltage at the output

20 Hz – 22khz

100µV

Noise voltage at the output

weighed A

80µV

Signal/noise ratio (SNR)

Input terminated at 0 Ohm, referred to 100W and weighed A

110 dB

Signal/noise ratio (SNR)

Input terminated at 0 Ohm, referred to 1W on 8Ohm – 20 Hz – 80kHz

82,2 dB

Signal/noise ratio (SNR)

Input terminated on 0 Ohm, referred to 1W on 8Ohm – 20 Hz – 22khz

89,0 dB

Signal/noise ratio (SNR)

Input terminated at 0 Ohm, referred to 1W on 8 Ohm – Weighed A

91,0 dB

Damping factor

8 Ohm

30

Frequency Responce

8 Ohms/1 W/-3 db

200 khz

THD at 100 W

8 Ohm/1 khz

0,02%

THD at 200 W

4 Ohm/1 khz

0,30%

THD at 350 W

2 Ohm/1 khz

0,50%

THD at 20 W

20 Hz-20 kHz/8 Ohms

< 0,006%

Stand-by power consumpition

230 VAC

<1 W

Dimensions

HxWxD

330x520x500mm

Weight

72kg